The sun is shining brightly in Antalya, and the roads are calling us. It's time to prepare your bike, which has been resting or tired from rainy rides throughout the winter, for those magnificent spring tours. We've summarized the things you need to do before the season starts in 7 steps for a safe, quiet, and smooth ride.

1. Deep Cleaning: Not Just Visual, But Mechanical Needs

Bicycle maintenance begins with cleaning. Dust, mud, and moisture that accumulate in winter create an abrasive layer on your gear system. Clean your frame, and especially your moving parts, with bicycle-specific cleaners.

2. Chain and Sprocket Control: The Key to Performance

Is your chain stretched? Is there any rust? Measure it with a chain gauge. If your chain has reached the end of its lifespan, replace it immediately to avoid damaging your cassette and crankset. Remember to lubricate the cleaned chain with a lubricant suitable for your riding conditions (dry or wet).

3. Is it time to retire your tires?

Tires that have been sitting undisturbed throughout the winter may develop cracks. Check for small cuts on the tire surface and the tread depth. Replacing your worn tires is vital for your safety and to ensure maximum grip on Antalya's warming asphalt.

4. Braking System: Don't hesitate when you need to stop.

Check the condition of your brake pads or shoes. If you use hydraulic brakes, test whether the oil has lost its properties (softness in the brake lever) from sitting overnight. If necessary, have a "bleeding" procedure performed.

5. The Hidden Danger in Cables and Wires

If your gear and brake cables are rusty or worn, gear changes will be slow and your driving experience will be spoiled. Check the smoothness of the cables; if there is any sticking, replace both the inner and outer cables as a set.

6. Update Your Safety Equipment

Your bike is ready, but what about you? Your helmet's inner padding might be worn out, or there might be invisible cracks in the frame. Remember, a helmet's lifespan (even without impacts) is only 3-5 years due to sunlight and sweat. Starting the season with a new and safe helmet is the best investment.

7. Get a Professional Check-Up

Some adjustments are too delicate to be done at home. Wheel truing, bottom bracket maintenance, or suspension servicing require expertise. With Uğur Bisiklet's experience dating back to 1975, let us check your bike from A to Z, leaving you free to focus solely on pedaling.


Our Spring Maintenance Campaign Has Begun!

Prepare your bike for the season with the assurance of Uğur Bisiklet. With our "Spring Check-Up" packages offered at our technical service center, let us handle all the checks, so you can simply enjoy your ride.

📍 We are waiting for you at our Antalya stores! 📞 For appointments: +90 554 582 96 57


Latest Blogs

View all

Çocuklara Bisiklet Sürmeyi Öğretmenin 5 Kolay Yolu: Ebeveyn Rehberi

5 Easy Ways to Teach Kids to Ride a Bike: A Parent's Guide

The journey from your child's first ride without pedals to the moment they feel the wind on their face is an unforgettable memory for both of you. However, to avoid turning this process into a "test of patience," it's essential...

Read moreabout 5 Easy Ways to Teach Kids to Ride a Bike: A Parent's Guide

Şehir İçi Ulaşım Rehberi: Elektrikli Bisiklet mi, Motosiklet mi? (2026 Güncel)

City Transportation Guide: Electric Bike or Motorcycle? (Updated 2026)

Looking to avoid traffic, cut fuel costs, or live a more environmentally friendly life in city transportation? Two strong contenders: electric bikes and motorcycles . However, questions like "Which is more economical?" or "Do I need a driver's license?" might...

Read moreabout City Transportation Guide: Electric Bike or Motorcycle? (Updated 2026)

Antalya’da Bisiklet Bakımı Yaptırırken Dikkat Edilmesi Gerekenler: Deniz, Nem ve Performans

Things to Consider When Getting Your Bicycle Serviced in Antalya: Sea, Humidity, and Performance.

Antalya, while a cycling paradise with its magnificent routes, also presents hidden challenges due to its Mediterranean climate . The salty air from the sea, high humidity, and scorching summer heat can rapidly shorten the lifespan of your bike if...

Read moreabout Things to Consider When Getting Your Bicycle Serviced in Antalya: Sea, Humidity, and Performance.

Frequently Asked Questions

What should I pay attention to when buying a bike?

When buying a bike, you should consider your intended use, frame size, gear system and suspension type . City bikes should be preferred for urban use, road bikes for long distances and MTB (mountain bikes) for difficult terrain.

How to choose the right frame size?

The frame size depends on your leg length and height. The following method is usually used:

For MTB: Multiply your inseam length by 0.21.

For road cycling: Multiply your instep length by 0.665.

For city/touring bike: Multiply your instep length by 0.66.

Which bike gear system is better?

Shimano and SRAM are the most popular gear systems. Shimano Deore and SLX are ideal for mid-level MTB. SRAM GX or Shimano Ultegra are recommended for road bikes. For professional use with a higher budget , Shimano XTR or SRAM XX1 can be preferred.

What should be the bicycle tire pressure?

Tire pressure varies depending on the type of bike:

  • Road bike: 80-130 PSI
  • City bike: 50-70 PSI
  • MTB: 30-50 PSI (Depends on terrain)

Low pressure provides better handling but requires more effort. High pressure provides faster driving with less friction but reduces comfort.

Should disc brakes or V-brakes be preferred?

Disc brakes provide more powerful braking, especially in rainy weather.

V-brakes are lighter and easier to maintain. They are sufficient for city use.

How often should a bike chain be cleaned?

It is recommended that you clean and lubricate your chain every 200-300 km . If you have used it in muddy or rainy weather, you should do maintenance more frequently.

What type of tire should I use on my bike?

Slick tyres: Ideal for road bikes and urban use.

Treaded tires: Suitable for MTB and off-road conditions.

Hybrid tires: Can be used both in the city and in light off-road conditions.

Which is better, a carbon frame or an aluminum frame?

Aluminum frame : Durable, budget-friendly, and common on entry-level bikes.

Carbon frame : It is preferred in professional road and MTB bikes because it is lighter and vibration absorbing.

What equipment is needed when cycling?

Helmet (Mandatory for safety!)

Gloves (For better grip and comfort)

Glasses (For protection from sun and dust)

Lights and reflectors (Increases visibility during night driving)

Locking system (Keeps your bike safe)

What clothes should I wear when cycling?
  • Wear sweat-proof, breathable clothing for long rides.
  • Wear thermal clothing and a windbreaker jacket in winter.
  • In summer, you can choose sun-protective jerseys and shorts .
  • You can find cycling clothing from this link: Cycling Clothing